Results 1 to 7 of 7

Thread: 3/4" bandsaw blade thickness

  1. #1
    Join Date
    Feb 2003
    Location
    McKean, PA
    Posts
    15,595
    Blog Entries
    1

    3/4" bandsaw blade thickness

    I'm trying to locate the manufacturer of a 3/4" x .023" 3 TPI blade that I have. I have some questions for those of you that have 3/4" band saw blades.

    What brand blade is it?

    How thick is the steel that makes up the band?

    What size band saw does it fit?

    What type and number of teeth per inch.
    Last edited by Lee Schierer; 05-13-2021 at 5:01 PM.
    Lee Schierer
    USNA '71
    Go Navy!

    My advice, comments and suggestions are free, but it costs money to run the site. If you found something of value here please give a little something back by becoming a contributor! Please Contribute

  2. #2
    A place I worked for years had a sharpening shop. They made the saws the length needed , some of the saws were 8 feet high. The most
    used sizes for the big machines was 3/4 band ,3 teeth per inch. We didn’t have to re-saw much, but used 2 teeth per inch. We also used
    some 1” bands.

  3. #3
    Join Date
    Oct 2004
    Location
    SoCal
    Posts
    866
    Timberwolf 3 TPI for 17" Griz. If you cannot find the the thickness online, I'll measure it tomorrow.

  4. #4
    Join Date
    Dec 2006
    Location
    Toronto Ontario
    Posts
    11,248
    Hi Lee, I buy my blades from R&D Bandsaw, a local company.

    My 3/4" blades are 0.032" thick, and 3 TPI

    They fit any machine as they're made to order............Regards, Rod.

  5. #5
    Join Date
    Sep 2013
    Location
    Wayland, MA
    Posts
    3,655
    Look at bandawbladesdirect.com. They will make you blades to length in a myriad of different kinds, thicknesses, and TPI. They sell Lenox primarily; I've been happy with them.

  6. #6
    Join Date
    Feb 2003
    Location
    McKean, PA
    Posts
    15,595
    Blog Entries
    1
    Quote Originally Posted by roger wiegand View Post
    Look at bandsawbladesdirect.com. They will make you blades to length in a myriad of different kinds, thicknesses, and TPI. They sell Lenox primarily; I've been happy with them.
    They don't seem to have any 3/4" blades that are .023 thick.
    Lee Schierer
    USNA '71
    Go Navy!

    My advice, comments and suggestions are free, but it costs money to run the site. If you found something of value here please give a little something back by becoming a contributor! Please Contribute

  7. #7
    Join Date
    Aug 2007
    Location
    Dickinson, Texas
    Posts
    7,655
    Blog Entries
    1

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •