Here’s a little table I just finished building and I made a three-part video series about it. https://youtube.com/playlist?list=PL...gSnaC90rcpTBar
Here’s a little table I just finished building and I made a three-part video series about it. https://youtube.com/playlist?list=PL...gSnaC90rcpTBar
Jason, please post some static photos here of your project...there are a lot of community members that have low speed Internet that limits their ability to view videos. Some photos will also bring relevance to the thread over time.
--
The most expensive tool is the one you buy "cheaply" and often...
It’s also kind of self promoting your YT channel too.
Yep, here's a couple of photos of the finished table.shaker thumbnail.jpgIMG_4184.jpg
That looks very much like the table I built from Woodsmith plans 30+ years ago.
John
Just curious how you cut the drawer faces out of the front of your apron? I've done it in the past by plunge cutting with a jig saw but figured there was an easier/more precise way.
You did a nice job.
Charlie Jones