I have a 10 year old vision 1624 that is running off engravelab, for the most part it is a great machine, but in the last year or so it has developed an issue that hopefully someone might know the answer to.
When I import an eps file and apply a diamond drag fill to it, the z axis is extremely slow and it raises up much higher then needed. It only does this on the fill section, the original outlines of the shape engrave at normal speed.
This is causing a plate that should take 20 minutes to engrave to take 2-3 hours.
The x y speed when engraving the fill is fine, just the up down z axis is moving at a snails pace.
Anyone come across this before or know where to look? I've double checked the settings in the tool path and the z speed is set to maximum with no difference.
Cheers!
Scott