Thanks for Project Finish section for help coming up with what paint I need to put a fresh look over my white lacquer finish cabinets. Now I need little help with selection for a palm sander to get into lots and lots of corners. All I need to do is kinda rough up the old finish and maybe smooth it out some so thinking along the lines of 320grit and up. But what sander, there's appears to be not a lot out there for getting into corners so between choices and budget I'm limited. I know that Fastool is top of the line but that's out of my league. So I have found that Skil makes sander for corners which kinda comes to point and me being cheap so does HF's Bauer. Either one is less than 40.00 so not to expensive if they actually works. But before I get down that low of quality, what would others suggest if they were looking for sander get into corners? Just give an ideal of my kitchen which is not big, so there are no large surfaces but only small surfaces. Looking for ideals,thanks SMC members