Hopefully this is a quick question. I have a 26 inch Woodmaster Drum Sander. I am having to replace the Velcro on the drum. I ordered a replacement from Woodmaster. Today I am taking the old Velcro off and that is a major chore, but my question is what is the best solvent to use to take off all of the old glue that is left on the drum. The rep told me to use Denatured Alcohol to clean the drum before placing the new Velcro on but I did not really think to asl what was the best way to remove the old glue. The old glue is the adhesive that comes on the Velcro. Any ideas what is the best or easiest way to remove it. Thanks in advance.