I am looking at purchasing a benchtop mortiser to do several large projects - a couple dining room tables, a china hutch, a workbench and some cabinets. Specifically breadboard table ends, leg joints and possibly cabinet door frames. I'd like opinions from you guys on what you have, or have used, and like. I am not finding a lot of reviews or information online about these machines, I assume they are not common in home shops (I've never seen one in a shop IRL) but they seem to be a good balance between something really expensive like a Festool Domino and the time and effort required to use hand tools. I'm leaning toward the Grizzly G0645 for price, and because I like the big cast iron table, but I don't know if any of the others out there have "must-have" features or a clearly superior fit and finish. I have absolutely NO experience with one of these, not even a drill press version, so I really need some advice.
EDIT: Realized there was a very good thread about this subject a couple years ago, so no need to respond unless you want to. Always looking for advice.