I’ve been working on this for a while. It was built to meet my needs. The top is 6’6” x 2’ x 39” high. The legs are splayed 15* long ways and 10* on the rear legs to the back. The front face is 5” deep and the top is 3 boards. The rear 2 boards are put together with dowels similar to dining table leaves. The leg at the tail vise is vertical with the stretchers angled to the rear leg. The wedges at the tail vise stretcher are folding wedges so they with not interfere with tail vise use. The square dogs are 1 1/2” from the face and the round dogs are 7 1/2” from the face. The dog faces are set up to be in line with each other. The tail vise has 2 dogs for maximum clamping space. The leg vise is angled to match the leg. I’ve been using it for a couple of months and it is settling in to a climate controlled area. It is all hard maple. I’m very pleased with it and that is good because I’m the customer.