Results 1 to 2 of 2

Thread: Corner Clamp - Precise and Versatile

  1. #1
    Join Date
    Jun 2020
    Location
    Port Hope, Ontario
    Posts
    97

    Corner Clamp - Precise and Versatile

    This corner clamp is easy to make with table saw.
    Wooden wedges clamp the material and keep it square.
    Four of these clamps, resting on a flat surface, will keep the project square and level.
    They are now included in my clamping arsenal.


    Video: https://youtu.be/BfYqk_x_aDo

    Corner Clamp 3.jpgCorner Clamp 4.jpgCorner Clamp 2.jpg

  2. #2
    Join Date
    Feb 2009
    Location
    Cedar Park, TX - Boulder Creek, CA
    Posts
    832
    That's awesome. Yet another thing on my project list.

    The only thing I'd add is to run the corner clearance holes thru the base for glue squeeze out. Maybe not thru, then you'd need something underneath to keep it off the bench. A blind well perhaps.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •