Those of you who use lasers such as Trotec, which use printer drivers might be interested in knowing that the latest version of Lightburn (0.9.21) has a print function, that will work with these lasers print drivers.
[OP]
Member
Those of you who use lasers such as Trotec, which use printer drivers might be interested in knowing that the latest version of Lightburn (0.9.21) has a print function, that will work with these lasers print drivers.
Shenhui SG350 fitted with a 60w tube.
Aeon Nova 10 100w tube.
Aeon Mira 5030 30w RF tube.
20w Fiber Laser.
50w Fiber Laser.
Located in the Isle of Man, which isn't in the UK but almost surrounded by it.
Member
I have tested it out, and it works with Epilog, but not with the Universal Laser Systems UCP. Lightburn outputs the line width at 1 pixel. It works with the Epilog Dashboard software, because it will split colors by either color or hairline. the ULS UCP only works with hairline. It will correctly convert a fill, but nothing else. I don't have the Trotec driver to test it out.
Posting Permissions
Reply With Quote