I've been using crosscut sleds for many years but never bothered with fancy stuff like flip stops. As I had to make new sleds for new saw, decided to give accessories a try, and found they are helpful.
I made the fence height the same on both of my sleds so that same accessories could be used on both sleds.
The accessories I made are shown in photos.
There is a video as well but the photos tell the story:
- Flip up stop blocks with magnets to hold the blocks up and magnets to hold the blocks down.
- Bolt on fence extensions so that the stop blocks can be used for cutting pieces longer than the crosscut sled.
- A sliding stop for cutting pieces too small to hold or clamp.
I am interested in other sled accessories that you have found helpful.
Video: https://youtu.be/QhJCVaw-jXA
Extension and Flip Blocks.jpg
Flip Stop.jpg
Slide Stop.jpg