Does anyone have experience with this Northfield Resaw Fence?
I am questioning the shown orientation.
Two concerns with shown orientation:
1. the fence will have the shorter length before the blade and the longer length after the blade. This does not seem best.
2. You cannot see in the picture, but, the roller clamp, per factory, are to have the slot oriented 40 degrees from the fence slots. So moving the roller clamps along the slot and away from the blade will move the roller clamps away from their position in line with the fence roller, even behind the blade. This too does not seem best.
What am I missing?
Thanks. John H
Reply With Quote