Results 1 to 3 of 3

Thread: Forum Search Issues - Unisaw Belt Tension Produces No Matches/Results

  1. #1
    Join Date
    Jul 2015
    Location
    SW Ontario
    Posts
    32

    Forum Search Issues - Unisaw Belt Tension Produces No Matches/Results

    Hey folks

    I am trying to find info about belt tension for Delta Unisaw. I type in unisaw belt tension, tablesaw belt tension, unisaw belt adjustment and there are no matches. How is that possible?
    Not trying to slag the Creek, it's a great resource, but am I searching incorrectly? Can it be that no one has ever discussed belt tension on this forum before?

    Delta recommends 1/4'' deflection in the belt, with light finger pressure at the midpoint of the belt length. Is that pressure in towards the pulleys, or out. Because there is more give when you push in, than away from pulleys. Delta doesn't specify. Also, I had to take the belts off, but not replace them. Does it matter if they go back on exactly how they were, ie. the natural shape of the belt when it comes off, should be sure to maintain that orientation when I put them back on?

    I ask because I did not do this, and I did not keep track of the 'belt shape', adjusted the tension so I could push it in a 1/4'' in towards the pulley. And now when I rotate the blade by hand, it does not spin as freely as I remember. I could have been too loose before, I don't know. Also, it seems to spin freer at different points of the rotation, which is why I asked about belt orientation. My shop temperature is likely around 5-8 celsius right now as well, so the belt's may be a bit rigid.

    Any tips, or things to consider when adjusting belts in this temp would be appreciated. Cheers

  2. #2
    Join Date
    Feb 2003
    Location
    McKean, PA
    Posts
    13,422
    The SMC search function leaves a lot to be desired. Open another tab and use google for the same search it will find SMC posts that are relevant.
    Lee Schierer
    Captain USNR(Ret)

    My advice, comments and suggestions are free, but it costs money to run the site. If you found something of value here please give a little something back by becoming a contributor! Please Contribute

  3. #3
    Join Date
    Mar 2006
    Location
    SoCal
    Posts
    21,124
    Blog Entries
    1
    Try this:

    Unisaw Belt Tension site:sawmillcreek.org
    I always forget . . . Is it the letter "S" or the letter "C" that is silent in the word scent?
    - Glenn (the second "N" is silent) Bradley

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •