Results 1 to 2 of 2

Thread: Glass panel help needed.

  1. #1
    Join Date
    Jul 2006
    Location
    Central, PA
    Posts
    416

    Glass panel help needed.

    I used Sommerfeld’s glass panel router set. Had bit of a learning curve but set works as advertised. I’m at the point that I’m gluing the mullions & mutins. They will attach as a lap joint. Sommerfeld recommends 2p10. I’m not sure how strong this stuff is and how long will it hold. I’m also concerned about squeeze out and unlike yellow glue, it can’t be wiped off.

    Any feedback would be appreciated.

    Thanks.

  2. #2
    Join Date
    Jul 2006
    Location
    Central, PA
    Posts
    416
    E43DCA0C-DC98-49F9-B35C-6EAE4F4DBD00.jpg

    Here is a picture with mullions and mutins in place.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •