Results 1 to 8 of 8

Thread: Makita LS1019L: Which adapter to connect to 2 1/2 inch hose?

  1. #1
    Join Date
    Dec 2010
    Location
    Lafayette, CA
    Posts
    135

    Makita LS1019L: Which adapter to connect to 2 1/2 inch hose?

    Hello,
    Wondering how others who own this saw have connected it to dust collection. The port on the saw seems to be about 1 1/8 OD...and I would like to connect to a 2 1/2 inch flexible hose. Has anyone found an adapter that will do this?
    Thanks!
    Izzy

  2. #2
    Join Date
    Feb 2010
    Location
    Mt Pleasant SC
    Posts
    658
    I have the 1013 and found a vacuum hose that fit around it and the other end went into my shop vac hose perfectly. It was a blue cheap wal—mart vac from many years ago that was going to be for vacuuming out the cars but was too loud.

  3. #3
    Join Date
    Jun 2015
    Location
    Northern California
    Posts
    310
    I have a 1013 as well and a Bosch 3931 shop vac (older model). I also have a Hoover upright vacuum (20+years old) and one of its accessories is a 15 extension hose that connects perfectly to the shop vac and saw with an adapter.

  4. #4
    My Festool CT extractor hose fits perfectly, not sure the OD but should be able to find it. I will measure when I get to the shop.

  5. #5
    Join Date
    Aug 2005
    Location
    Midwest
    Posts
    1,916
    Find a local woodturner and have them turn an adapter for you.

  6. #6
    Join Date
    Nov 2006
    Location
    Atlanta
    Posts
    823
    Izzy there are several off the shelf options. I’d suggest getting a dedicated hose, or at the least upgrade what you’ve got.

    I know this works because I have it setup on my 1019.
    https://www.lowes.com/pd/Shop-Vac-12...m-Hose/1042233

    think it might have been recently discontinued, so might be tough to find. Ridgid makes a similar kit at H. Depot.

    this should work nicely
    https://www.amazon.com/Cen-Tec-Syste...0&sr=8-24&th=1






    or these if you just want an adapter
    https://www.ptreeusa.com/dust_adaptors.html

  7. #7
    Join Date
    Sep 2009
    Location
    Putney, Vermont
    Posts
    882
    I use my small shop vac with my 1013 and the tapered end of the vac extensions fits into the dust port on the 1013.

  8. #8
    Join Date
    Oct 2019
    Location
    North of I-84
    Posts
    47
    Rockler sells some Flexiport adapters that fit small (~1"-1.5") ports. I've used one for a portable sander.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •