Grizzly sells a 12" drum sander. The current part number is G0459. I'd be using it to take the saw marks off band-sawn veneer. However, Grizzly says that the minimum stock thickness is 1/8", and I want veneer which is thinner than that -- more like 07-.08". I understand why thickness planers generally don't go thin -- the veneer gets sucked up into the knives, and it gets shattered. I'd hope a drum sander is less aggressive, so it could produce thinner veneer. But it seems that this sander can't go thin. Anybody with wisdom about producing thinner veneer with this sander, or drum sanders in general?