Hello again everyone.
I've been busy sharpening old saws and making a few as well. I started with a small pile of rusty saws and I'm feeling better everyday with my sharpening.
I've been carefully holding a file in my hand to joint and decided I like sharpening enough to have a dedicated jointer. I figured I would slot a piece of wood, stick a file in there and use a couple screws to keep it tight.
I know, I could buy an old one but I've seen some nice homemade examples.
If you have a homemade one. Please post a picture. I'd like to see what others have come up with.
Matthew