[OP]
Moderator
I have a Beismeyer fence on my table saw. Today I moved the fence and the little piece of formica that goes on the locking plate fell off. My question is, whic side of the metal piece show below is it supposed to be attached? Does the cam ride on the formica or does the formica go between the lever shown and the 2 x 3 tube rail?
IMG_0754.jpg
Lee Schierer
USNA '71
Go Navy!
My advice, comments and suggestions are free, but it costs money to run the site. If you found something of value here please give a little something back by becoming a contributor! Please Contribute
Contributor
My piece of formica sits between the rail and the locking plate. Looks like some form of lubrication layer to avoid the two steel parts maybe rusting together.
Contributor
Between the lever and the tube.
"Only those who have the patience to do simple things perfectly will acquire the skill to do difficult things easily.”
Friedrich von Schiller (1759-1805)
"Quality means doing it right when no one is looking."
Henry Ford
Contributor
Originally Posted by Tony Joyce
Good answers , both of them
[OP]
Moderator
Thanks guys it is back in place.
Posting Permissions
Reply With Quote