Hi all,
I'll be starting a TV cabinet in a few months (unheated garage in Toronto....) and I'm starting to acquire the hardware.
Some of the specs -
- plus/minus 7 feet long
- sliding doors rather than swing out doors
- 3 sections for electronics, stereo equipment and discs etc - this means 2 dividers
- the TV will be on the top of the cabinet
Some questions I'd appreciate your help with -
- does each sliding door gets its own groove?
- if there's 3 sections, is it best to have 3 sliding doors so 2 sections can be almost fully accessible or would 2 grooves do the job which would mean the middle section would always be 1/2 covered each time)
- does anybody have any experience with these - https://www.leevalley.com/en-ca/shop...e?item=00B1026
All ideas and suggestions are welcome.
Many thanks.
Howard