Working on my first deep pour. 24 hours in there are still some areas that are tacky. Temp should not be a problem, I am reading now and think it is due to scraping. If it doesn't solidify in the next 12 hours or so, I am going to need a plan of action to fix.

I do plan on planing a bit off the top, so if the soft spots are just on top, I may be able to scrape and get out my router jig. If I do opt to pour a layer over the top it would need to be thin. I think the ecopoxy recommends something like 1/2" minimum. Is it ok instead to layer with a 6 hour epoxy with the same tint?