Hello,
This is my first post. I have a two-decade old Supermax 37x2 dual drum sander and I need to replace the conveyor belt. The instructions in the manual do not exactly match the machine. For example it says to loosen ONE of the (2?) set screws on the conveyor shaft to enable the motor to be removed. Mine appears to have 4 and I do not see how loosening one will work. Additionally, it says to remove the four 5/16 bolts: there are 2 sets (of 3 )and neither is 5/16... I am assuming I should remove the bolts between the conveyor assembly and the aluminum (?) box and not between the box and the black motor (see attachment).
Any advice, private or public, would be appreciated.