I think t-track works good and so does the Matchfit. But with t- track your limited to what you have on hand or want to use, were as with the MF dove tail groves it can be cut to size and length and then cut up and discarded (sacrificial jigs and such) with no cost (once you have the system ) and if you don’t have any t-track laying around (when you need it) you just make the MF groves for that application. So in my eyes I see a use for both.
Richard
Richard Poitras
Central, Michigan....
01-02-2006
I've also just recently seen the Matchfit system- they are advertising heavily on Instagram. The use of an adjustable height sit stand table is intriguing as it can serve many purposes and is mobile. I'm thinking of making one. But, I wonder about its stability. Has anyone built one of these mobile workbenches?
The dovetail system also looks interesting but I would have a concern about it being a sawdust catcher. Probably no more than a T slot system catches sawdust but no less either. My T slots are always getting jammed up. They're easy to clean with the vacuum but a disruptive annoyance to the workflow nonetheless.
If you don't have any T-track laying around then you can make your own T-slot with a router bit (similar to dovetail slots) or a combination of router bits or gluing boards on top of each other as in this video. https://www.youtube.com/watch?v=PxNS9ulGlpo
Last edited by Johnny Barr; 01-26-2021 at 4:34 AM.
i like the clamps but in all honestly i personally think they are too expensive,,,its more of a gimic than anything else,,that being said i dont like the gripper either,,i had one and called mine the slipper,,i sold mine for 30 dollars,,,but i will say micro jig customer service is top notch,,,i called them about the gripper and told them mine was the slipper and they sent me new pads free of charge and was very polite and said they hated i had that trouble with their product,,but needless to say it was no better,,,so i sold it,,,
Regarding expense: you can get 4 of the original design clamps for $90 which doesn't seem that bad to me. Especially when you consider the clamps can be used like the Festool quick clamp...slide the foot through a hole in a MFT type top and clamp whatever you want, in addition to being used with the dovetail slots. They are not quite as spiffy as the festool clamp, but at roughly half the price are fully functional and easy to use in that manner.
--I had my patience tested. I'm negative--