I've got the Shapeoko XXL. Added the HDZ soon after. It is an OK machine, but it IS most assuredly a hobby machine. It uses just a router. It works well, but I've got $3500 in it and stuff to make it work. Don't forget a computer. And a dedicated dust collector if you are running it much. (or upgrade your DC to take care of increased use). $2500 won't get it done. If that is your top budget, I'd spend the next couple of months looking for a USED machine. You can find a Shapeoko for under it retail used and not too difficult. OR save your money and get a better machine for more. I'd NOT buy this again as it is too much for the $.
Woodworking, Old Tools and Shooting
Ray Fine RF-1390 Laser Ray Fine 20watt Fiber Laser
SFX 50 Watt Fiber Laser
PM2000, Delta BS, Delta sander, Powermatic 50 jointer,
Powermatic 100-12 planer, Rockwell 15-126 radial drill press
Rockwell 46-450 lathe, and 2 Walker Turner RA1100 radial saws
Jet JWS18, bandsaw Carbide Create CNC, RIA 22TCM 1911s and others