So I've been using, and really happy with, the Freud 99-510 the very few times I've used it for shop cabinets. I'm getting into the house now, and unfortunately, between S4Sing the material and panel flattening, by the time the door panels are coming out of the drum sander, they're closer to 5/8 than 3/4 thick. The 510 is 5/8" high, and works nicely for 3/4 material, it works in 5/8, but doesn't look right, doesn't quite look like a raised panel! The only 1/2" high quad cutters Freud makes are 3 1/2 in diameter, which is not what I really want. Is there an equivalent 1/2" high cutter that is 2 3/4 in diameter, hopefully that has 4 cutters? Not seeing anything on MLCS....given the supply of material and time spent milling it, not really willing to start over and keep things at 3/4, and accepting 5/8 panels is easily overcome provided I can find a 2 3/4 cutter that I like.