Finished this up yesterday. Its square enough, a couple oops spots (had to relocate the right dowel) - but good enough for the shop. This might be the last time I buy the S4S pine at the Borg, its just not worth the price compared to getting a 2x12 of clear SYP (after 10 minutes of digging) and milling it. I did it it to speed up the build but its just impossible to find stuff without any twist.
Anyway, this is half of the saw and plane till by Mike Siemsen in PWW 226 with a couple modifications. Will be adding 4 drawers to the bottom area. I use a dutch tool chest, but since this is over my bench I'm probably going to move my marking and measuring stuff to the drawers.
I have a couple saws on order that will fill up the small side already, should have made it wider I guess.
IMG_5969.jpg