Making a NE desk with Big Leaf Maple and wondering if there is any benefit/limitation using Tung Oil as the first coat to bring out more grain character before using a poly for a more durable top coat. I've done the first coat on the drawer pedestals and it looked good when wet and flattened--as expected-- when dry and haven't done 2nd coat yet. Not sure how much oil is in the poly I'm using and not sure if more oil or initial straight oil first coat would make a difference or effect the durability of the poly top coat. I usually just gettertdun but this is for a friend and I would like to max the nice character of the slab. Thanks, John