That's really great, James...your shop is going to enjoy the new toys!
That's really great, James...your shop is going to enjoy the new toys!
--
The most expensive tool is the one you buy "cheaply" and often...
I really hope so, Jim; so excited!
New 20" planer is already here and my Stinger II left Georgia yesterday and is in transit to the Lehigh Valley.
So many new toys to play with and learn how to use!
===========
James Cheever
Ga Tech NROTC - 1978
Run Silent, Run Deep
Commander, USN (Retired)
--
The most expensive tool is the one you buy "cheaply" and often...
Erik, here's a link: https://magport.net/products/5-magport-5001
And there was trouble, taking place...
Thanks, guys.
Erik
Ex-SCM and Felder rep
Taking a cue from a youtube video on the A3-41, I'm trying the Rockler schedule 40 to 4" adapter and their quick fit adapter stacked on each other - should allow me to go from the 120mm port to the same handle I use on other machines. If that doesn't work, Magport it is based on Mr. Crawford's success here.
Some creative spirit should 3D-print a snorkel that replaces the entire factory plastic piece and integrates that magnetic flange. As many A3 owners as their are, you could make a fortune.
Erik
Ex-SCM and Felder rep
I love my Magport fittings, with two main drops that service about 7 different machines, it make switch over so easy.
Nice video Chris, thank you.
Just wondering why you use a Magport on the Rockler quick connect, when you can just connect them quickly without?