Building a dresser with inset drawers. I am using 3D adjustable guides. One corner of a cross member moved on me during glue up and I didn't catch it. It sits @ 1/32" short of being where it should be even with the front of the post. My initial though was to try and cut a piece to glue onto it across the face thicker on one end and down to nothing on the other and then hand plane it flush and square across so the drawer fits properly. 2nd thought was to try and split the 1/32" between the dresser frame and drawer front by planing/sanding as little(seems fraught with potential errors like giving yourself a hair cut) and kind of hide it from the eye and use the 3D to help me do this?
dresser corner.jpg
Appreciate any suggestions.
Thanks.
Brian