I have a California Air Tools 10020AC compressor (2HP, 5.30 CFM @ 90psi) that I use mainly for blowing off stuff, and supply to my wide belt sander, and occasionally for a staple gun. I don't use other air tools.
Despite having an automatic drain valve on it, it still spits water on occasion. I'm looking for the best way to dry the air from it. I'm sure living in Florida doesn't help.
Is the best approach a desiccant in line filter (with dessicant beads https://www.amazon.com/gp/product/B0...6WMF7DIH&psc=1), or something like this PneumaticPlus 3-stage air drying system https://www.amazon.com/gp/product/B0...HTFH4QLV&psc=1 , or something else?