These machines are for sale close by and I'd like some ideas on what would be fair prices.
The first is a little 1hp General International dust collector.
IMG_8656.jpg
This would be useful at my 20" bandsaw. I currently use my shop vac, but I could leave this little one hooked up. Can't find any pricing online for this. It's probably not being made any more. A Harbor Freight 1hp dust collector sells for $130.
Next up is a Jet 22-44 drum sander. A quick look online says these sell for around $2,300. It seems to be in good condition so hasn't been used hard.
I have a 15" wide belt sander, but the width is limiting. The machine also has it's personality that I always need to be tuned into when I'm running it. I haven't used a drum sander, but I would see it as being for glue-ups to just even out the rough joints.
IMG_8654.jpg
Lastly is a Taiwanese made Powermatic 15" straight knife planer. Again the condition is good (but dusty!). A Byrd head with bearings and shipping would come to about $900.
IMG_8644.jpg
Thanks for any feedback you can give me.
Mark