Results 1 to 5 of 5

Thread: One solution to expansion

  1. #1
    Join Date
    Apr 2017
    Location
    Michigan
    Posts
    2,769

    One solution to expansion

    This worked ok, 25 years with no issues. Maple I think and the legs are Elm.
    Expansion.jpg

    Well I haven't figured out how to post it upright but that's not as important I guess.
    Last edited by Lee Schierer; 11-18-2020 at 6:36 PM. Reason: Fixed phto orientation

  2. #2
    Join Date
    Mar 2003
    Location
    San Francisco, CA
    Posts
    10,319
    Maybe a little more explanation would be useful. What are we looking at -- a chair, a stool, what? And what is the expansion solution? And why does it work?

  3. #3
    Join Date
    Apr 2017
    Location
    Michigan
    Posts
    2,769
    Lee, thanks for turning my stool upright

    Jamie
    The X brace is one piece of Maple that should expand with humidity changes. If it were made with a full width tennon it would damage the joint, and/or split the brace. This design allows it to flex to accommodate the expansion.

  4. #4
    Join Date
    Feb 2010
    Location
    Mt Pleasant SC
    Posts
    721
    Dual wishbone flex spreader. Very cool.

  5. #5
    Why anyone should know that to be a dynamic hybrid stress relief matrix for de cure of de wood movement. A reduculator for short.

    And people think it is just furniture!
    I want to stay as close to the edge as I can without going over. Out on the edge you see all kinds of things you can't see from the center.
    - Kurt Vonnegut

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •