Results 1 to 15 of 28

Thread: Oneida Super Dust Gorilla - Not starting

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 11-16-2020, 1:22 AM #1
    Frank Martin
    Frank Martin is offline [OP] Contributor
    Join Date
    May 2005
    Location
    So Cal
    Posts
    867

    Oneida Super Dust Gorilla - Not starting

    I purchased the 2.5 hp Onedia Super Dust Gorilla Cyclone in 2008 and have used it minimally since then in my hobby shop. When I attempted to run it today it did not start, no noise from the magnetic switch or the motor. I am suspecting the switch may have died but don’t know how to check or repair short of replacing it. When I opened it, everything looked fine visually.

    Any ideas on how to troubleshoot?

    Several pictures of the switch are below for reference.
    73C40A42-32A3-4B0E-9B10-FDB6AA022F70.jpg1E899B51-DFF2-4070-82E7-E8E9F8303DDC.jpg33E01152-4AB1-4797-B776-F75F434311E5.jpg
    Last edited by Frank Martin; 11-16-2020 at 9:10 AM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules