I purchased the 2.5 hp Onedia Super Dust Gorilla Cyclone in 2008 and have used it minimally since then in my hobby shop. When I attempted to run it today it did not start, no noise from the magnetic switch or the motor. I am suspecting the switch may have died but don’t know how to check or repair short of replacing it. When I opened it, everything looked fine visually.
Any ideas on how to troubleshoot?
Several pictures of the switch are below for reference.
73C40A42-32A3-4B0E-9B10-FDB6AA022F70.jpg1E899B51-DFF2-4070-82E7-E8E9F8303DDC.jpg33E01152-4AB1-4797-B776-F75F434311E5.jpg