So instead of spraying a nasty rusty mess of water all over the wall and floor I went to home depot to buy a cheap 25ft air hose to route outside to drain the water out of the air compressor. Worked great. The drain has a 1/4" npt fitting so I was easily able to screw the air hose to it then just roll it back up and place it beside the compressor until the next time. I got one of those smaller diameter blue semi see thru hoses that people like to use for their paint guns. I just wanted to mention this in case anyone else wanted to try it. Although I ain't the sharpest blade in the shop, so I'm sure this is standard practice. lol