https://www.youtube.com/watch?v=n4aMqCbqVmA
He hollows out a vase using
1) A spindle gouge
2) A parting tool
3) A spade bit
4) A pointed carbide tool
5) And finally a bowl gouge
I've used 3 & 5, but the rest seem odd.
He then finishes the outside by putting a disk in the vase throat and treating it as a spindle.
Never seen this before, but it looks like a good idea.
As a finish, he used a 50/50 mix of BLO and cedar oil. What is cedar oil and why would one use it.
Comments would be interesting.