Results 1 to 5 of 5

Thread: length of SCM outrigger table

  1. #1
    Join Date
    Sep 2010
    Location
    Kauai, Hawaii
    Posts
    156

    length of SCM outrigger table

    Can anyone tell me the length of the SCM outrigger tables. From photos, on all the mid-range saws, they seem to be the same length, which to me looks like 1500mm (measured from the blade). Felder has 1300 and 1500. What's the size SCM puts on their US sliders? Thank you.

  2. #2
    The outrigger for my SC4-E is 48” before it attaches to the sliding carriage. The end of it sticks out 62” from the blade.
    Last edited by Kendall Scheier; 10-30-2020 at 1:51 PM.

  3. #3
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    54,626
    The exact specifications are on the SCM/Minimax web site. This document is for the Minimax series....

    https://www.scmgroup.com/products/do..._feb20_Eng.pdf
    --

    The most expensive tool is the one you buy "cheaply" and often...

  4. #4
    Join Date
    Sep 2010
    Location
    Kauai, Hawaii
    Posts
    156
    Thank you. That's very helpful.

  5. #5
    Absolutely

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •