Hi All, I am looking to add a parallel rip fence to my Minimax Sliding Table Saw. I have seen folks attach an Incra Positioner to an extension table on the slider wagon. It seems like an easy way to get accurate and repeatable results while still using the wagon. Incra shows a 15-19 week backlog and I am not that patient, so I am looking for alternatives. I am open to a "ready-to-use" positioner similar to Incra. I am also fine with building something with aluminum extrusion, assuming I can find an easy base to attach to an extension table and have the extrusion slide easily through that base and lock in place. I am guessing there are many ways to add this functionality to my wagon, so I thought I would ask others how they have before I go try to re-invent the wheel. Thanks so much!