Hi,
For you fellow folks in the frozen north, how do you do your HLVP spraying in the winter?
I'm using water base, so no need to worry about flammability, and I have the materials to do the insulation board/box fan spray booth set up. I want to exhaust outside, as I don't want the VOCs or overspray in the shop. I'm wondering how to do a setup that exhausts outside, with the outside temp being likely somewhere between 0F - 20F. If it is much colder than that, I probably would wait to finish.
I could just open the swinging barn doors and put the insulation board, fan, and filters between them and open a window for makeup air, but I think I would cool the shop down pretty quickly, even with the unit heater and stove going. The shop is about 670 sq ft in size with 9 1/2' ceilings. I would likely be doing only one or two furniture items at a time, no mass production things, at least none planned
Any ideas?