Hi,
I'm looking for switch for Powermatic PM 209HH, 230V, 1PH
Thanks in advance for any help.
Jaromir
Hi,
I'm looking for switch for Powermatic PM 209HH, 230V, 1PH
Thanks in advance for any help.
Jaromir
Jaromir
That looks like just part of a switch, Jaromir. Your best bet may be to replace the entire unit with a new magnetic switch designed for 240v 1ph, preferably one with an e-stop type design for "off" like I think the component you show was part of.
--
The most expensive tool is the one you buy "cheaply" and often...
That should be a generic replaceable part. Use the search term "mushroom stop switch". For example.
Beranek's Law:
It has been remarked that if one selects his own components, builds his own enclosure, and is convinced he has made a wise choice of design, then his own loudspeaker sounds better to him than does anyone else's loudspeaker. In this case, the frequency response of the loudspeaker seems to play only a minor part in forming a person's opinion.
L.L. Beranek, Acoustics (McGraw-Hill, New York, 1954), p.208.
That looks like the operator of a switch, not the switch itself.
Look here https://www.ereplacementparts.com/po...550_32575.html at part number A101. Hope you can repair the push button, as the whole off switch is like $85. At least they're in stock!!
earl
Is the switch broken? Usually on EMO switches that part is removable and can be swapped with a different design if needed to meet regulations in different countries. Almost any EMO switch would do (assuming you want the twist function).
Switch itself is working. I just need part in picture. It was creaked so I glued it back together, but now it's not working as smooth like before.
Jaromir
I see where it’s glued, will it come apart where you could smooth out the insides with a dremel tool?