Hi folks. Putting together a small basement shop {22 x 12} and looking for some input on dust collector. Tools I have are a very old delta unisaw, drill press, 6" jointer, 14" bandsaw, router table, miter saw and an ra saw. Ya things are a little tight. Anyway, my second issue is ceiling height is a little low. One dc I was looking at is Jets dc-1100vx-ck. Seems to get pretty good reviews and is 120v which I'm afraid is a must. Rolling around from tool to tool would be difficult. So I guess my real question is would this dc be to small for a limited amount of duct work? Anyone have this specific model set up in a similar way? Or can you recommend something different or another option for a set up. Any advice would be greatly appreciated. Thanks. Have a great day and be safe