Results 1 to 2 of 2

Thread: Pipe Thread Tap & Die case

  1. #1
    Join Date
    Jun 2010
    Location
    twomiles from the "peak of Ohio
    Posts
    12,120

    Pipe Thread Tap & Die case

    A way to keep these separate from the main set..
    Tool box Project Post, opened lid.JPG
    Size ranges from the 1/8 NPT up to a 1" 11-1/2 Greenfield..the lonely Die is a 1/8" NPT. still plenty of room for more, IF they show up.
    Tool box Project Post, hinge details.JPG
    Hinge view, lid was sawn off the box...
    Tool box Project Post, end details.JPG
    End view...Note where the saw line went through the dovetails...
    Tool box Project Post, Front view.JPG
    View of the front. Box stands 3" tall ( with the lid closed..) and is 6" x 9" over all...

    Wood is Poplar, with the tap holder being some Pine scraps. Added a foam pad to the underside of the lid.
    Thanks for looking in.

  2. #2
    Join Date
    Jun 2010
    Location
    twomiles from the "peak of Ohio
    Posts
    12,120
    This about completes a set of boxes for the smaller tools...
    Tool box Project Post, full set.JPG
    Spaces for screws and other small hardware for around the house...smaller tools....the two sets of taps & dies....labels to help find things..
    Tool box Project Post, label holders.JPG
    May build more...maybe....not sure what else could be in this set...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •