In my current shop I have a griz 1029 dust collector connected to Table saw with a hose on the floor running to the wall then connected to A vertical pipe as part of the rest of the system. It works fine and is in a place that is not a normal walk path. The power cord is next to it. I am building a new shop with a different layout. I have some ideas but don’t know that I can cast in concrete (or at least the pipe that is). If I don’t I will have to do a vertical drop in the center of the shop or lay the pipe in a walk path. Any suggestions? Do I put pipe in the most logical Place in the floor and if I do something different just cover it up
thanks
gary