********************
Ceramic Bearings.jpg
********************
Ceramic Bearings.jpg
David, did you mount a tool holder on your machine, or are you just changing them manually?
Hi Scott,
I have designed and built a retractable automatic tool changer.
David
20200201_000643_resized_1.jpg20200201_000625_resized_1.jpg20200201_001838_resized_1.jpg
I have this setup mounted on my smaller table, but if configured correctly, this design would work on a 4 x 8 table with no loss of usable table area.
David
David, that's a really nice setup to provide ATC where there's limited space, etc.!
--
The most expensive tool is the one you buy "cheaply" and often...
Thanks Jim!
David