Results 1 to 3 of 3

Thread: Tap & Die Box

  1. #1
    Join Date
    Jun 2010
    twomiles from the "peak of Ohio

    Tap & Die Box

    Made from 1/2" thick Poplar...
    Project Post, tap box front.JPG
    Through dovetails on the corners of the box...
    Project Post, tap box, end details.JPG
    Lid has mitered corners, where the edges of the blank for the lid was folded down, and glued in place
    Project Post, tap box, back view.JPG
    Hobby Lobby supplied the hardware...had a nice stash saved up...
    Next Project, Hardware supplies.JPG
    Lid is held open with a length of chain...
    Project Post, tap box, opened lid.JPG
    Inside you will find a few "racks" for taps and dies, with room to expand as needed..
    Project Post, tap box, inside view.JPG
    Just a box...
    Project Post, tap box, top of lid.JPG

    12-1/2" by 7-1/2" by 7" tall...
    Thanks for looking in..

  2. #2
    Join Date
    Jun 2010
    twomiles from the "peak of Ohio
    Currently working on a smaller house a set of pipe thread taps, and a die.....may post that here as a separate "Project"....

  3. #3
    Join Date
    Mar 2006
    What a great home for those tools.
    "The Danish government believes that if we train 5,000 designers, and produce
    one Hans Wegner, the money is very well spent." - Ole Gjerlov-Knudsen

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts