Leigh VRS1200 - Dust Collection & Router Support for PC 4200 Dovetail Jig

[George Bokros]

Any buy one? Thought and opinions of it?

Thanks

[Eric Arnsdorff]

I recently bout a VRS for my Leigh DR4 and in my brief test so far I was very happy with the dust collection and it is helpful in the router support.
I'm getting it setup for a project I'm working on this evening and I'll report back after my 2nd use.
On my first trial run I was very very happy the shavings weren't all over me and the floor! It's worth it just for the sawdust removal.

[johnny means]

I find it indispensible. When machining a stack of drawer parts, cleaning up after each part can become the closest part of thes process.

[Eric Arnsdorff]

I’m very happy with my VRS.
I checked my air flow AFTER I had routed the dovetails as I thought it was better the first time ... sure enough my piping had a clog. But the pictures show the little bit of shavings even with very poor airflow.
I also really like having the support there as well. It’s a good design and with the magnets it is easily removed for setup and such.
While I think Leigh is making a decent profit on it, I’m also happy with the cost and would definitely recommend it.



003A72CD-24DF-450F-B399-59470A6315CD.jpg
BF7994ED-4A6D-4FC2-A049-5E38B6609D8E.jpg
0198E006-B118-4BA7-96E0-3A44263881B2.jpg

[Bob Hinden]

I have one for my Leigh dovetail jig, works great. Beside doing a great job on dust collection, it also makes a larger platform for the router base.