I'm trying to remove the spindle from a MAX OVS I acquired a few years ago. I sort of put it on the back shelf and now want to get using it. I added a smidgen of oil in the gear box but now can't get the spindle out. There's the safety nut that is attached to the spindle via a drift pin that possibly the previous owner has sheared off and a main spindle nut below that. My question is, how do I remove this spindle? That main spindle nut won't budge or perhaps I'm turning it the wrong way. I've tried both ways. I've never had experience with the MAX sanders before so looking for some help here. The manual doesn't seem to have any info other than how to install a spindle. Any help would be appreciated.