Page 2 of 2 FirstFirst 12
Results 16 to 22 of 22

Thread: Power down on my 80w Rabbit.

  1. #16
    So 3 new mirrors, and a new tube, still low on power. Now that I have a amp meter to watch as I was slowly increasing the power from 50 and finally I did 100 the meter actually dropped back down to 7-9ma at full power!

    Whats next? Power supply? If it is, did I buy a tube prematurely? Ray said it looked like my old tube was firing fine in a video I showed him.

    Argggg.
    Rabbit RL-80-9060
    Roland SP-540i
    Graphtec ce5000-60
    Graphtec fc7000-100
    Happy HDC2-1501
    Juki 1541s

  2. #17
    Join Date
    Mar 2014
    Location
    Iowa USA
    Posts
    4,441
    Quote Originally Posted by Bill George View Post
    Sounds like a question to Ray at Rabbit Laser USA. If you have been using it for years at the same settings and now its not working sounds like dirty or cracked mirrors or lens. Unless your tube is failing but Ray will have answers.

    Maybe if you would have contacted Ray like I suggested.....
    Retired Guy- Central Iowa.HVAC/R , Cloudray Galvo Fiber , -Windows 10

  3. #18
    why do you think the mirrors were shot. you said it had little use. My original mirror still working fine after 6 years.
    Have you thought about becoming a contributor , then you can post pictures and stuff. I know its wicked expensive at 6 bucks a year but the help you get here is worth it.
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  4. #19
    Ray said to send power supply back for testing.
    Rabbit RL-80-9060
    Roland SP-540i
    Graphtec ce5000-60
    Graphtec fc7000-100
    Happy HDC2-1501
    Juki 1541s

  5. #20
    Join Date
    Mar 2014
    Location
    Iowa USA
    Posts
    4,441
    Quote Originally Posted by Dennis Watson View Post
    Ray said to send power supply back for testing.
    Could of saved a lot of money doing that first.
    Retired Guy- Central Iowa.HVAC/R , Cloudray Galvo Fiber , -Windows 10

  6. #21
    Really?



    The message you have entered is too short. Please lengthen your message to at least 10 characters.
    Rabbit RL-80-9060
    Roland SP-540i
    Graphtec ce5000-60
    Graphtec fc7000-100
    Happy HDC2-1501
    Juki 1541s

  7. #22
    Join Date
    Sep 2009
    Location
    Medina Ohio
    Posts
    4,516
    On my 60 watt if I have the min power set low sometimes my max power does not go up above 10MA

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •