Page 2 of 2 FirstFirst 12
Results 16 to 22 of 22

Thread: Yet another bandsaw help question: Laguna LT18 vs Bx18

  1. #16
    Join Date
    Jan 2012
    Location
    Katy, TX
    Posts
    53
    Mike, I see you are an early 2000s LT18 Owner. I have sent you a PM. When you have a moment, please give it a look.

    Quote Originally Posted by Mike Wilkins View Post
    If you are processing rough timbers, especially thick ones, I would go with the LT18. I have had one since 2001 and not a problem with it. The newer models have more resaw capacity than the 12" of my machine, but I would get another in a heartbeat if a UFO ever crashes into my shop.

  2. #17
    Join Date
    Mar 2017
    Location
    SE Mass.
    Posts
    186
    What's a good first blade for the LT18? I thought I'd get a Resaw King, but unsure between 3/4" 1" or 1 1/4" widths. Primary purpose is really getting to know the saw, but I do have some 6" thick oak planks to dimension and resaw.

  3. #18
    Join Date
    Mar 2010
    Location
    Quorn United Kingdom
    Posts
    554
    I live in the UK
    Two pieces advice I would suggest
    (1) Always check you have tensioned the blade before starting the saw I forgot to reternsion the blade and ignored the unusual sound made the saw The blade came off the wheel and destroyed the lower bandsaw tire The cost of a replacement tire was many hours of research ,$200 and 2 round trips of 120 miles to take it the be rebonded

    To remind me to retension the blade I have a laminated sign which I attach to the blade with a magnet


    If you damage the edge of the ceramic guides you can simply remove the ceramic guides from the bandsaw and turn them 180 degrees and remount

  4. #19
    Join Date
    Apr 2018
    Location
    Cambridge Vermont
    Posts
    911
    I put a 1" Lenox Woodmaster B bi-metal blade on my Grizzly. Grizzly said it's tension an 1 1/4" blade but I think that might be a little optimistic. I wanted to get to know the saw and tune it before investing in a carbide tip blade. Call me a chicken but I really didn't want to put a blade costing nearly $200 on a saw and have a major problem. It works well for resawing. The LT18 is a step up from my Grizzly so you probably could go with the 1 1/4" blade. They are well under $100 so it's not a big investment and it's nice to have a blade that you can use down the road for wood that's dirty or otherwise questionable vs a carbide blade. Then if you like what you've chosen you can get the Resaw King (that's my plan but so far I haven't gotten around to ordering the resaw king yet).

  5. #20
    Join Date
    Nov 2006
    Location
    Atlanta
    Posts
    621
    1” is the widest you can reasonable tension on that saw and 3/4” would be better.

    It’s unlikely that you would even notice the cut difference btw a properly tensioned blade of either 3 widths. You will notice a difference in the cuts of an improperly tensioned blade - and that chance increases with wider blades on that saw.

  6. #21
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    53,778
    Quote Originally Posted by Dave Sabo View Post
    1” is the widest you can reasonable tension on that saw and 3/4” would be better.
    I agree with this. Just because something will physically fit, doesn't mean the machine will work well with it. With bandsaws, tension is a huge factor in cut quality, etc.
    --

    The most expensive tool is the one you buy "cheaply" and often...

  7. #22
    Join Date
    May 2014
    Location
    Santa Fe, NM
    Posts
    178
    You might also look into the Lenox Woodmaster CT blade at roughly the same price as the Resaw King. I frequently find myself holding a piece of resawn wood up to the light to see if I'm looking at the planed side or the resawn side.
    Congrats on the new saw. It's a fine machine.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •