Results 1 to 3 of 3

Thread: Sapele 1x15" speaker cab

  1. #1
    Join Date
    Aug 2003
    Location
    Boulder, CO
    Posts
    196

    Sapele 1x15" speaker cab

    I don't know that I actually posted this here. I just finished a 1x15" speaker cab for a Weber P15N reissue that's been sitting in the woodshop getting dusty for 10+ years. It's going to sit underneath a matching Princeton reverb head. I cut the dovetails about 70% by hand with the bandsaw providing the remainder. The boards are 14" wide, which means the main error in the joint is cupping across the width also it's really hard to manage a long, wide board on a typical bandsaw dovetail jig.

    Finish is top coat of Skelton Oil (from the saw company) and a couple coats of T&T varnish oil underneath that.

    The floral grill cloth makes the amp louder. Much Louder.

    https://photos.app.goo.gl/UtV6xmquRsJRu5iq7

    IMG_20200616_152932 (1).jpg

  2. #2
    Join Date
    Feb 2019
    Location
    Averill Park NY
    Posts
    145
    That looks great!
    Some Blue Tools
    Some Yellow Tools
    And a Pet Grizzly
    ShapeokoXL
    Blue and White 50 Watt

  3. #3
    Join Date
    Aug 2020
    Location
    St. Albert, Alberta, Canada
    Posts
    60
    Nice job. Why did you rear mount the speaker on the baffle board?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •