I played with the original unicorn and was able to use Corel X7 trace function easy. A lot of images don't really trace well without cleanup, but this one did.
Two things. I ran one with no hatch. (roughly 2 inch height image) it took 15 seconds. and then with a fill (2000 speed so fast fill) one pass took 76 seconds.
And very little difference on the scrap piece of aluminum I used. Now there is a difference, but you don't have a lot of fill to do as far as width between lines, just a lot of lines that are very close.
I'll attach the ezd file in a zip.Unic.zip
Woodworking, Old Tools and Shooting
Ray Fine RF-1390 Laser Ray Fine 20watt Fiber Laser
SFX 50 Watt Fiber Laser
PM2000, Delta BS, Delta sander, Powermatic 50 jointer,
Powermatic 100-12 planer, Rockwell 15-126 radial drill press
Rockwell 46-450 lathe, and 2 Walker Turner RA1100 radial saws
Jet JWS18, bandsaw Carbide Create CNC, RIA 22TCM 1911s and others