I've been working on this old Railroad bench that was my Dad's. The original one was rotted and falling apart(except for the iron armrests). I asked and got some advice (Thanks) on the Teak I used over on the Boatbuilding Forum.
I decided awhile back that I would remake it as close to original as possible out of some Teak that I had on hand for the last 20 years. My purpose was to recreate the old bench, not to make/design a new one. Over the last few weeks, I ordered and received stainless steel screws, clear coating that is supposed to protect the raw metal on the 3 armrests and some teak oil to put on the wood. I also had to buy some additional Teak to finish.....$OUCH) Now, it is finally completed and I am happy with the final project. The pictures are of the old bench (this post), a few in process pictures(next post) and the new finished bench (3rd post).
20200705_154128.jpg
20200705_154135.jpg
20200705_154206.jpg
20200705_154439.jpg